Mercury Glass Winter Table

   I love mercury glass!  Do you?  I started collecting mercury glass several years go and I use it to decorate my formal dining room table in the winter.  After weeks of Christmas decorations, I wanted to continue in the spirit of sparkle and decided to do it with silver mercury glass. My dining room doesn't receive much natural light so I don't always get very nice pictures of my table in the winter.  This year, though, I think I have done better--would you like to see?

 I used mostly my finials and my mercury glass trees with

 a few candle holders and my mercury glass birds.

I had been putting my decorations on just my white tablecloth.  It was an impressive display because I had a lot of pieces, but it didn't photograph very well  and I was tired of the look.  At some point this year, I decided I would add some greenery to my winter table.  I looked at the artificial greenery I had used on my mantel and thought when I took it down, I might use it on the table.  Then, I had an even better idea.....I would cut up our Christmas tree!  Our tree was super-fresh this year and was not dropping needles, so I thought, why not?? 

***Now, I have to say here, that for several years, my husband has been cutting up our Christmas tree (while it was still in the stand) when it was time to take it down.  Yup.  He takes the pruners and lops off a few of the larger and longer branches and escorts them outside.....so much better to do a few branches at a time than trying to wrestle a whole tree out the door!!! 

So this year, I snipped off the branches that I needed and when I needed more, I just went back to the tree.  I was very happy with the way things were turning out.  The tree still smelled so nice, too!

I had also decided that my white dishes looked pretty plain on my white table cloth.  I thought I would check out the area sales for silver chargers, but I didn't see any on sale.  Michael's had one for 1.99.  I needed six and I was feeling a little cheap, too, so I'm glad I didn't find what I thought I needed,  because I decided to use silver trays for chargers instead.  Why not!  IT WAS PERFECT!  Yeah!  Something I already had on hand--saving money and not having another set of chargers to store.

I have a number of silver trays.

This one is engaved and is from when

my aunt retired from teaching grade school for 34 years.

This one is engraved on the back with my wedding date

 and our names.  It also has the dates and names of my great aunt

and uncle who married in 1925 and then a cousin who married in 1976. 

I added  green glasses and green napkins with

silver snowflake napkin rings that I already had.

 

 Here's a picture from last year with the candles lit for an evening meal. 

 There's really no comparison to me.  I love the new look so much better!

  I used fewer pieces of mercury glass, but have a look that is new and fresh.

  I know I'll be cutting up the tree again next year!

WELCOME WINTER!

Joining the Party:


Between Naps on the Porch




Coastal Charm



  My Romantic Home


Table Top Tuesday with A Stroll Thru Life

WOW Wednesday at Savvy Southern Style
Party 100


Showcase Party



Time Travel Thursday

Spring Plants and Porch

I started gathering plants for my pots several weeks ago.  I planted most of the pots two weeks ago and they are looking great. 

I have a lot of green plants that stay outside year-round.

 But, when the weather begins to warm up, I am ready

to plant my pots with flowers that I will enjoy until late fall

Here's the planter that I have on my front porch. 

  

Here's what most of my pots looked like a few weeks ago.

The pansies worked hard this winter, but it was time for them to go.

Here are some pictures of my back porch and side patio.

I often use the plants (above) in larger pots, but I'm going to try them

on a small table pot and try to keep them pinched back.  I am

also trying some flat leaf parsley in this pot.  If it does well,

I'll try it in some other pots next year.

Lately, gardeners around here have

been using a  "recipe" for their planted pots.

The recipe is pretty easy.

You need:

1. A thrill (a showy plant)

2. A spill (a plant that trails down)

3. A fill  (the other plants that fill up the rest of the pot).

In this pot (above), you might be able to spot my three "ingredients."

1.  A larger coleus named "Kong" 

 It's a little small now, but it will get bigger and

 really look nice.  It is in the back right with the

green and red leaves.

2. I love creeping jenny and I love to use it in my pots. 

It is the plant that is trailing out of this pot.

 I love the color and it holds up well in our Alabama heat.

3.  I have some splash and begonias as my fill plants.

I have found that these plants work well on my porch and in our long hot summers.

The little white purplish flowers in the bottom

 of this pot is alyssum (Easter basket variety).

My baker's rack looks like this almost year round. 

.

I use a lot of pinks in my pots as a general rule. 

But there was something appealing about making this

pot with lots of green foliage and little flowers in white and purple.

This pot has some variety in it.  Verbena (pink blooms), the darker purple below the

verbena is Joseph's Coat (it comes in a bright green, too).  It stays low and doesn't

 flower.  The bright green in the front is sedum and it can take the summer heat. 

I save the little identification tags for the plants that I am least familiar with.

 That way, I'll learn their names and also, so I'll remember them next year

 and if I want to use them again.

I still have a few plants left over and I will make a couple more pots to enjoy.

 Here's a sneak preview of our next outdoor project!!

Have you done any spring planting?  I'd love to know!

Joining the party:

Nesting Place's

Planting Party

Galvanized Tray-PB Knock-Off

I saw a tray the other day in a Pottery Barn ad.  I was visiting looking at the 3-tier galvanized stand when I noticed that they were also showing a round tray.  I thought to myself, "I can make a tray like that."  I moved on with my day and then at sometime thought...hummmm....I bet they have something galvanized at my local hardware store I could use to make a tray.   Never once did I think....hummmm....do I need a galvanized tray???   The hardware store is an old-fashioned store where you can go in and buy one sheet of sandpaper or one nut or bolt.  So I stopped at the store the next day and began my hunt.  I like to walk up and down the aisles and look at all the items they have there.  Some are familiar and some are not.  I always try to decide if I can make something from the items I find there.  It is a really good way to keep your imagination sharp!

So here's my version of a galvanized tray.

Here's how I made the tray.

I got this round (whatever-you-call-this) at the hardware store.  It cost $4.95 and it was a little dusty.  I marked it in quarters with tape (since I couldn't see pencil marks). 

I got out the drill and the bits.  I had purchased handles at another store and I checked to see if the bit I chose would fit in the hole where the screw would go.  I decided to use a bit that was a little on the small size knowing I could make the hole larger later if I needed to.

These are the handles I bought.  I couldn't decide, so I bought these that weren't too shiny. 

Now you don't know me, but I don't always measure the way some people do.  I got an index card to mark the distance between the screw holes.

I then folded the card so it would be the distance I needed between the two holes I would drill.  I thought that the card would conform to the side of the tray better than it would be for me to try to measure with a ruler.

I drew these arrows for you. You can see where I'm going to drill the holes. I also folded the card down the distance down from the top where I needed to drill the holes.  The arrow pointing up is lined-up with one of the quarter tape marks I did at the beginning. 

I took it slow and easy (and I wore protective eye ware).  I didn't want the drill bit to dance across the surface of my tray.  It did great!  I substituted the screws that came with the handles for some that were a little shorter.  The substituted screw fit through the hole and into the handle perfectly!  I drilled the next hole and attached the first handle.  On the other side, before I drilled, I measured again and tried to make sure the second handle was directly across from the first handle.  I also decided to apply one piece of clear tape on each of my marks.  It was perfect to help keep the end of the drill bit in place so it wouldn't skim across the side of the tray as I began to drill.

I found these little "collars" in with the nuts, bolts and screws.  I decided to try them with the project.

They looked nice when they were used with the screws. 

I think they gave the tray a more "finished" look.

Well, what do you think?  I'm pretty happy with the results!

One of the neatest things I discovered was that the round place mats that I have (standard size) fit perfectly into the tray.  I have several colors already and can change up the look of the tray in a flash.

And since I already had an extra set of handles, I went ahead and got another (whatever-it-is-called) and made a second tray in just a few minutes.

Pottery Barn $29.95 for round galvanized tray.

Marsha's under $10.00 for round galvanized tray.

 Hello Summer!

Joining the Party at: